Profile

https://www.patreon.com/KandorinCreations

My official reference sheet artist: https://www.weasyl.com/~forgess

MATERIAL LOCATOR! Before asking "where did you get ____?" check here ---> https://www.weasyl.com/journal/107041/material-locator (I you still can't find it feel free to ask. I don't bite, I promise!)

NO SOLICITING!! - NO I will not spread your kick-starter, go fund me, or anything else around so do NOT publicly or privately ask me to do so.

***NOTE- I do NOT make hands, feet, or bodies on commission! These items can only be obtained form me as part of a partial or full suit. The one exception being if you have commissioned me in the past and are adding to said commission.

Heads- start at $1000 I need half down
Semi-Partials-start at $1300 I need half down
Full suits- start at $2400 I need half down

Resin Blanks:Closed
uncut for $100.
cut and hinged for $140
cut and hinged with installed eyes for $180/ $210 with LED's
Installed teeth, tongue (finished mouth) +$60

Bases currently available:
Medium cat: http://www.furaffinity.net/view/12626390/
Fox/ Medium canine: http://www.furaffinity.net/view/9617229/
Sight hound: http://www.furaffinity.net/view/15995948/

Masks:Closed
$700 and up

Eyes:Closed
The eye sizes I offer are:
1 inch ($30)
1 1/4 inch (my standard size $35)(This is the size that fits into my resin bases)
1 1/2 inch ($40)
2 inch ($50- Two inch eye blanks are considerably more expensive then the smaller sizes.)

These base prices go up for UV, LED's, more then three colors, metal plating, different colored eyes, and pupils that are NOT round (follow-me effect is standard)
All eyes are hand painted with metallic paint to add a life like sheen.
I do not do printed eyes.

Examples:
1 1/4 inch ($35) http://www.furaffinity.net/view/10712921/
1 1/4 inch, more then three colors, different colored eyes ($50) http://www.furaffinity.net/view/9846112/

Duct Tape Dummy Requirements and Tutorials

http://www.plus3defense.com/how-to-make-a-dtd Note: This tutorial was made by another fursuit builder and varies slighting from my requirements!! You must build DTD to go over your heels!

http://www.roofur.com/commission/dtd_info.php Note: This tutorial was made by another fursuit builder and varies slighting from my requirements!! You must build DTD on a painters suit and not pajamas!

*DTD's must be at LEAST three layers thick. If they are too thin they tend to fall apart and stretch making them useless. Note: if you hold them up to the light and can see any light coming through them they are too thin! You should not be able to see any of the material from the painters suit coming through the tape. Another way to know if it is too thin is if it doesn't weigh anything. DTD's should take up at LEAST four standard rolls of duct tape.

*DTD's MUST be taped back together, NEATLY, before being shipped to me! If a DTD arrives that has not been taped together or has been taped back together weakly (as in it will break apart if I stuff it) You will be charged a $50 service fee for me having to take my time and materials to assemble it. If It is too thin and I need to add layers there will have a $100 service fees. If you do not wish to pay these fees then be prepared to make and ship another one! (Or just do it right the first time..cause it saves us both a lot of hassle!)

*They must be made over a painters suit, not pajamas or other clothing. Some clothing can be elastic and will warp the duct tape. If the painters suit is not long enough for your arms and legs you can use things like paper towel or plastic bags to extend it.

*The DTD is REQUIRED to go down over your heels at the least. The entire foot is preferred.

*Do not wear anything that stretches under the duck tape. (for example: a stretchy sock under the foot tape. Wrap your foot in a trash bag or paper towel. )

*DO NOT wear a diaper under your DTD.

*ATTENTION!! DTD's must meet standards to be used. If it does not, it will either need to be repaired or be thrown out and you will be asked to make a new one. If I have to repair it there will be a service fee. I have received too many that have been unusable or would not provide accurate dimensions for the commissioners body. I am not willing to put my time and your money into something that very well may not fit due to the inadequacies of poorly made DTD.

FOR THOSE COMMISSIONING ME FOR SUITS!!!

Depending on a case by case basis completion at the soonest could be as low as two to three months. I will NOT commit to anything under a year because my schedule is constantly changing but if you have a date in mind I am willing to try for it pending it's a realistic request. Also, I reserve the right to refuse service or continuation of service if the commissioner is unruly, does not respect my TOS, or become harassing. You MAY NOT make serious changes to your character after I have started building including eye color fur selection and LED colors ect. (You may ask but I make no promises as at this point these will all be done.) I wont be forced to start over because you wish to change something that is already set in stone. Make sure when you commission me you know what character you want and how you want it to look before committing to spending well over a grand and this will save both you and me a lot of frustration. I will NOT make copyrighted characters for commission or purchase. Down payments are not refundable as that is what I use to buy the materials for suits. Production will not start on a suit until they have been paid off. I simply do not have the room to store suits that are completed but cannot be shipped due to not being fully paid off.

I WILL NOT TOLERATE HARASSMENT OF MY COMMISSIONERS IN ANY WAY SHAPE OR FORM!! IF YOU ARE HARASSING THEM YOU WILL BE BLOCKED AND MY COMMISSIONERS WILL BE ADVISED TO DO THE SAME ACROSS THE BOARD! IF YOU ARE ONE OF MY COMMISSIONERS YOUR COMMISSION WILL BE TERMINATED AND YOU WILL BE REFUNDED AT MY EARLIEST CONVENIENCE!

SHIPPING

YOU are responsible for shipping! Shipping is charged after the suits completion as it is the only time I can get an accurate shipping quote. This also assures that when your item is ready to ship you can choose the type pf shipping and speed you prefer. If nothing is specified I will ship USPS express with tracking. I insure all packages over $20 for their worth and will send you the tracking number as soon as your items have been shipped.

ALLERGEN WARNING!!!!

I spend time on a farm with horses, cats, dogs, poultry, goats, and reptiles as well as have dogs, cats and reptiles of my own and am constantly coming in contact with them. I you have just a minor allergy please let me know so I can take extra steps to make sure it doesn't become a problem. If you have sever allergies while badges wont be an issue if you are ordering a partial suit or accessories to a suit that require material and fur I advise you that there are dogs and cats in the house and if your health is at risk you may want to consider another artist. I cannot control shedding and can and will not be held liable for something that is a natural function of the pets I keep. I am sorry if this inconveniences anyone.

My PayPal address is Keeatah@gmail.com

Please when sending money through PayPal make sure you state who is sending it and the type of commission you are receiving. Chances are I will not recognize your E-mail and it will help avoid confusion on my end.

If you are interested in commissioning me please send me a note.

Contact

Skype
Keeatah
Tumblr
http://keeatah.tumblr.com/
YouTube
KandorinCreations

Latest Journal

Material Locator

on 29 May 2016 at 20:16:58 MDT

Paint: (silicon coloring, mask painting, eye painting, some drybrushing)
http://www.violtan.com/artshop2/index.php?Oper=SetBrand&BrandID=FAM&Lang=EN

Gloves for casting:
http://www.uline.com/BL_6723/Uline-Black-Nitrile-Gloves

Apoxie Sculpt:
(the clay I use for lips. jowls, and custom eyelids. )
(black) http://www.amazon.com/Apoxie-Sculpt-Lb-Epoxy-Clay/dp/B000V5C18I/ref=sr_1_6?ie=UTF8&qid=1445993622&sr=8-6&keywords=apoxie+sculpt
(pink, the color I use on albino characters) http://www.amazon.com/Apoxie-Sculpt-1-Lb-Pink/dp/B005JKMNTC/ref=sr_1_1?ie=UTF8&qid=1445993766&sr=8-1&keywords=apoxie+sculpt+pink
(for when you need to use a lot this is a lighter weight option. Will need to be painted over. )
https://www.smooth-on.com/products/free-form-air/

Hinge material:
(The shutter samples work really nice, can be cut with scissors, come with pre-drilled holes for hardware, and will not squeak or snap like resin)
(Not to mention you can get them at Menards for free!)
http://www.exteriorsolutions.com/p-119-perfect-shutters-sample-color-chips.aspx?

Foamies:
(5mm thick-ear forms-black)
http://www.hobbylobby.com/Crafts-%26-Hobbies/Basic-Crafts/Craft-Foam/Black-5mm-Thick-EVA-Foam-Sheet/p/111098
(3mm thick- chin liner and eye protectors-black)
http://www.hobbylobby.com/Crafts-%26-Hobbies/Basic-Crafts/Craft-Foam/Black-3mm-Thick-EVA-Foam-Sheet/p/23080

Duck Tape:
http://www.amazon.com/dp/B00BR1FOO8?tag=price1199909-20&m=ATVPDKIKX0DER

Hot glue:
http://www.glu-stix.com/shop/page/product_detail/Product/5c5f7517b30add4c70eb3cd776a69d91.html

Eye Blanks:
http://www.delviesplastics.com/p/Half_Round_Ball.html
or
http://www.usplastic.com/catalog/item.aspx?itemid=23376&clickid=redirect
or
http://www.tapplastics.com/product/plastics/plastic_rods_tubes_shapes/acrylic_cabochons/139

Mannequins:
http://compositeeffects.com/mystore/index.php?route=product/category&path=107
or
http://www.monstermakers.com/product/deluxe-full-head-sculpting-armature-life-size.html
or
http://www.monstermakers.com/product/deluxe-full-head-sculpting-armature-life-size-alanna-head.html

Liquid Latex:
(For hooves)
http://www.monstermakers.com/product/Mask-Latex-for-Black-Masks.html

Silicone:
(for pawpads, noses, and tongues) {Dragon skin fast}
https://www.smooth-on.com/products/dragon-skin-10-fast/
(for molds) {Rebound 25}
https://www.smooth-on.com/products/rebound-25/

Resin:
{Smooth cast 300 }
https://www.smooth-on.com/products/smooth-cast-300/
{Smooth cast 325 color match}
https://www.smooth-on.com/products/smooth-cast-325/
{smooth cast Onyx}
https://www.smooth-on.com/products/smooth-cast-onyx-fast/

Resin dyes and fillers:
(added to uncured resin)
https://www.smooth-on.com/products/ignite/
https://www.smooth-on.com/products/so-strong/
https://www.smooth-on.com/products/cast-magic/
https://www.smooth-on.com/products/glow-worm/
https://www.smooth-on.com/products/cryptolyte/
https://www.smooth-on.com/products/quarry-tone/

Fur:
http://fursuitsupplies.com/
http://www.imstuffedfur.com/_index.php
http://www.distinctivefabric.com/long-pile-fur.html
http://www.crscraft.com/products/vProduct2.asp?pid=Fur&L1=2&L2=13&L3=0&L4=0&V2=1&V3=0&V4=0&cat=bear+supplies&sub=Fabrics&class=
http://bigzfabric.com/index.php/fabrics/faux-faux-fur-fabric-long-pile/faux-fake-fur-solid-shiny-tinsel-long-pile-fabric.html

Shavers:
(For shaving the fur on faces)
http://www.walmart.com/ip/11035640?wmlspartner=wlpa&selectedSellerId=0&adid=22222222227000046269&wl0=&wl1=g&wl2=c&wl3=40341931592&wl4=&wl5=pla&wl6=78301784072&veh=sem
or
http://www.sstack.com/Horse-Care_ClippersAccessories_Clippers/Wahl-Pro-Ion-Cordless-Clipper/?utm_source=google&utm_medium=paid_search&utm_campaign=paid_search_google_pla&scid=scplp8812315&gclid=CjwKEAjwya-6BRDR3p6FuY2-u3MSJAD1paxTIIFgsgPKDGVo4UMUKLGG9WAd2McTfYR6DkIW4mk7whoCiOLw_wcB

High density foam:
http://www.joann.com/search?q=foam

Shoe Goo:
(for putting bottoms on feet)
http://www.walmart.com/ip/SHOE-GOO-110011-Shoe-Repair-Adhesive-Multi-Purpose-G6218861/40830725

E6000:
(What I use to attach crystal accents)
http://www.walmart.com/ip/Eclectic-Products-E6000-Multi-Purpose-Adhesive/24692833

Spay adhesive:
(Used for my gold earliners)
http://www.uline.com/BL_8103/3M-Super-77-Adhesive?pricode=WO547&AdKeyword=3m%20super%2077&AdMatchtype=e&gclid=CjwKEAjwya-6BRDR3p6FuY2-u3MSJAD1paxTJD4q7kd8x3NFW-N7XGlQpU5jvwQmuFgJAnUvS2an5xoCU-vw_wcB&gclsrc=aw.ds

Primer:
(black)
http://www.menards.com/main/home-decor/crafts/spray-paint/primer-spray-paint/painters-touch-ultra-cover-2x-flat-black-primer-spray-12-oz/p-1956024-c-12867.htm?tid=-720836095810134206
(white)
http://www.menards.com/main/home-decor/crafts/spray-paint/primer-spray-paint/painters-touch-ultra-cover-2x-white-primer-spray-12-oz/p-1955951-c-12867.htm?tid=-720836095810134206

Sealer
(semi gloss)
http://www.menards.com/main/home-decor/crafts/spray-paint/all-purpose-spray-paint/painters-touch-ultra-cover-2x-clear-semi-gloss-spray-paint-12-oz/p-1956030-c-8050.htm?tid=7700165962501495423
(matte)
http://www.menards.com/main/home-decor/crafts/spray-paint/all-purpose-spray-paint/painters-touch-ultra-cover-2x-clear-matte-spray-paint-12-oz/p-1955977-c-8050.htm?tid=-3767191552840565872

**Note these are only what I use, research your project before starting as there may be other materials that can better suit your needs.

View This Journal and 3 Comments

Statistics

Joined 20 November 2012

3675
Pageviews
421
Followers
48
Favorites Given
530
Favorites Received
73
Submissions
3
Journals
67
Following

Shouts

  • Link

    Awesome and unique, thanks for posting.
    Now I'm going to have to rustle up some of them for a photo shoot sometime.

  • Link

    Heeey there awesome person!

  • Link

    You have some pretty cool lookin' designs here.
    Keep it up! :D

  • Link

    Thank you for the watch - I'm flattered! Your work is impressive.

  • Link

    Thanks a ton for following me in return. Your work is gorgeous!