One of my best multi color prints so far! I promise my dog was only annoyed for a moment with these reindeer antlers on XD It uses 4 colors, with a total time of about 6 ish hours to print! I'm getting the hang of the process! It is a bit lengthy, but I'd love to integrate these into some final products down the line! While they're cool on their own, it needs to be part of something to really make it POP

This is the first multi color print that successfully uses the PrusaSlicer without massively under-extruding on the Top,, bottom, and infill lines. I think I was just trying to get my machine to run way too fast(Snapmaker 2.0 at 80mm/s print speed.) To remedy this without intensive tuning, I took advantage of a really cool setting in Prusaslicer called Maximum Volumetric speed. Setting this correctly, while setting all your printing speeds to 0 will allow the slicer to automatically create efficient speeds that are fast while maintaining constant nozzle pressure using the maximum volumetric speed as a constraint., It worked BEAUTIFULLY. Turns out my recommended printing speeds are around 30-40mm/s instead of the 70-90mm/s I was pushing my printer to. Youch. Someone get me a voron printer lol. Want one of those fast bois.